classifyOnboardingFirmware() (firmware-compat.ts) returns kind values of
"custom" | "flashable-stock" | "newer-stock" | "unknown", but
applyClassification()'s switch (onboarding-firmware-check-view-model.ts)
checked for "flashable" / "newer" -- names borrowed from the unrelated
CheckPhase type used a few lines later via setPhase(). Since kind was
typed as plain string, nothing caught the mismatch at compile time.
Effect: any device that successfully reported a firmware version (stock,
flashable-stock, or newer-stock alike) fell through to the switch's
default case and showed "Connected, but couldn't read a firmware
version" -- the hard-block message meant for when the probe gets no
data at all. Confirmed on real hardware (glasses on 2.2.9.22): the BLE
probe read the version correctly every time, logged it correctly, and
the UI still reported it as unreadable.
Fix: match the real OnboardingFirmwareKind strings, and tighten the
parameter's type from `string` to `OnboardingFirmwareKind` so this
category of typo fails to compile instead of failing silently.
<details>
<summary>Prompts Used</summary>
Thanks. Next up, we're going to work on the main screen bottom input area.
We will have a distinct state for keyboard-input mode (ie when you select a setting with a text field). While in that state, we'll hide other inputs (ie the simulated watch and ring input buttons) and put the text input (which is currently a modal on top of the screen preview) in the space below the screen preview. If it doesn't fit, given the reduced screen height while the keyboard is open, it will overlap the screen preview. When leaving a text-input screen, we will close the keyboard.
When the keyboard isn't open, we will have a tab bar-style row of buttons underneath the screen preview, with three tabs: Settings, Watch, and Ring. The Settings tab will have brightness and screen size options (we will drop the options in the Phone Display section of the Settings app which would hide these settings). The Ring tab will have a set of buttons corresponding to simulated R1 ring inputs (the main page has recently had this, but currently doesn't seem to). The Watch tab will have a simulated watch face for simulated Android Wear watch inputs (this is currently on the main page).
> Done — builds and typechecks cleanly. Here's the shape of it:
>
> **Keyboard-input mode**
> - When a text setting becomes active, the whole tabbed controls area collapses (`controlsVisibility` on the `rc:remote-controls` instances in both orientations), leaving the space below the preview for the editor.
> - The text editor overlay is now anchored to the **bottom** of the page instead of the top. Combined with the keyboard resizing the page, it sits in the space below the preview and only rides up over the preview when the keyboard leaves too little room. To make that resize behavior deterministic, I added `android:windowSoftInputMode="adjustResize"` to the activity in the manifest (previously unset, so Android picked pan-vs-resize itself; note this applies app-wide, which is generally the better behavior for the other pages with text fields too).
> - When the glasses navigate away from the text-input screen (`activeTextSettingId` goes null), the page now dismisses the soft keyboard, and the tab area comes back.
>
> **Tab bar** (`remote-controls.xml` rewritten)
> - Three tabs — Settings, Watch, Ring — as a segmented row of buttons; the selected tab is remembered across page navigations (module-level, in-memory), defaulting to Watch.
> - **Settings**: screen-size picker (labeled row) and the brightness slider + Auto switch, now always shown.
> - **Watch**: the simulated watch face unchanged (touchpad with d-pad overlay and legend) plus the Back/Menu row.
> - **Ring**: a 3×2 grid of larger labeled buttons for the R1 inputs — ▲ Up, ▼ Down, ● Click, ●● Double, ‒ Hold, and Hey Even (the wakeword, which moved here from the old shared action row since it's a ring-scheme input).
>
> **Settings app**: `showBrightnessControlSetting` and `showScreenSizeSetting` are deleted outright (definitions, menu items, and the view-model visibility getters). The Phone display section keeps Preview color and Touch mirror. Users' old stored values for the deleted keys are simply orphaned, which is harmless.
>
> Things worth checking on hardware: the editor's position with the keyboard open (especially on a short screen where it should overlap the preview), keyboard dismissal when backing out of a text setting on the glasses, and dark-mode contrast of the tab buttons (I inverted the selected/unselected colors for `.ns-dark`).
<hr>
Keyboard-open view: Looks good. One minor (preexisting) issue: The input title (eg "Agent bridge port") appears twice.
Keyboard-closed view: It looks like the tabs are vertically centered when they should be closer to the screen preview; and, the tab contents don't seem to be visible at all.
> Both issues fixed, verified on the tablet, and the fixed build is installed on both devices.
>
> **Tab bar centered / contents invisible** — I reproduced it on the tablet and traced it with a native view-hierarchy dump. The visibility bindings and tab switching were actually working fine; the bug was a NativeScript layout quirk: a `GridLayout` with no `rows` attribute gets a single implicit row that behaves like `*` (star). The old page measured the controls inside an `auto` grid row (unbounded, so the star row collapsed to content), but the restructured page puts them in the outer grid's `*` row (bounded measure) — so the rows-less tab-bar grid ballooned to fill all remaining height, centered its buttons in the stretch, and left zero height for the tab contents below it. The fix is explicit `rows="auto"` on the tab bar, both Settings rows, and the Back/Menu row in `remote-controls.xml`. Verified all three tabs on-device: Watch shows the touchpad + Back/Menu, Settings shows the screen-size picker and brightness row, Ring shows the six input buttons, all sitting directly under the preview.
>
> **Duplicate input title** — for a single-field edit, the editor title and the field's own label are the same string (`editorTitle` defaults to the field label), and the page rendered both. The per-field label is now only shown when a second field exists (where the labels actually distinguish the fields); single-field edits show just the one heading.
>
> One thing I noticed but couldn't test while disconnected: the keyboard-mode change is untouched except for that label, so it should still look as you saw it. There's also a pre-existing console error on page load — `keyboardType="text"` is not a valid NativeScript keyboard type (only email/number/etc. are), so the binding logs an error and falls back to the default keyboard. Harmless, but the clean fix would be to leave `keyboardType` unset for plain text; happy to do that if you want.
<hr>
Thanks, that is now working. Next up let's add a microphone button to the tab bar, as the rightmost button. Use an icon rather than text, and make it narrower than the others. The button will leave the tab selection unchanged, and trigger as if the wakeword ("Hey Even") was spoken. This will replace the "Hey Even" button in the Ring section.
In the Watch section, we will vertically center the emulated-watch UI within the remaining space beneath the tab bar, and set a maximum width corresponding to an aspect ratio for the simulated watch face of 1.5:1.
> Done and verified on the tablet; both devices have the new build.
>
> **Mic button** — added as a fourth, narrower (56dp) column at the right end of the tab bar, showing the 🎤 emoji. It uses the plain tab style, never shows the selected state, and taps route to the existing `onSyntheticMicTap` (ring "wakeword"), leaving the tab selection untouched. The "Hey Even" button is gone from the Ring tab, which now has just the five ring inputs (Up / Down / Click on the top row, Double / Hold below).
>
> **Watch tab centering + aspect cap** — the component root is now a `rows="auto,*"` grid (tab bar on top, the three sections sharing the star cell), and the portrait page gives the controls the full star row (with Stop recording moved to an `auto` row beneath, so it still appears when recording). The watch section — face plus the Back/Menu row — is `verticalAlignment="center"` in the leftover height and width-capped at `min(available width, 1.5 × 230dp face height ≈ 345dp)` via a new `watchFaceWidth` getter that recomputes on orientation change (in landscape the side panel's 328dp effectively governs). Verified on the tablet: the face sits centered between the tab bar and screen bottom at the capped width, and Settings/Ring stay top-aligned.
>
> One aesthetic note: on the Samsung tablet the 🎤 emoji renders as a gray studio mic rather than a colorful one — legible, but if you'd rather have a crisper icon I could switch to a font-icon or a tinted drawable.
<hr>
Thanks. For the microphone button, let's use `~/Downloads/noun-microphone-1368757.svg`.
> Done — the mic button now uses your Noun Project SVG instead of the emoji, verified on the tablet and installed on both devices.
>
> Since NativeScript Buttons are text-only, I converted the SVG's two paths into an Android VectorDrawable (`App_Resources/Android/src/main/res/drawable/ic_tab_mic.xml`, with a comment crediting the source file) and made the mic control a button-styled GridLayout tile holding a tinted `Image`. It keeps the 56dp width and the `.tab-button` look, plus a small `android-elevation` so it casts the same shadow as the real MaterialButtons beside it. The icon tints `#333333` in light mode and `#cccccc` in dark mode via `tint-color`, matching the tab label colors, and the tap still fires the wakeword without touching tab selection.
>
> One licensing note: Noun Project icons are CC BY unless you have a Pro license — if you don't, the icon's creator should be credited somewhere user-visible (e.g. an about/credits page) before a public release.
<hr>
(I do have a Nounproject pro license)
Thanks, the icon renders correctly, but it's off-center (top and left rather than centered on both axes), and the height and drop shadow of the mic button now doesn't match the other buttons in the tab strip.
> Fixed and verified on the tablet; both devices have the build.
>
> Two things were wrong, both variations of the same NativeScript grid quirk from before:
>
> - **Off-center icon**: the tile's row was effectively auto-sized — row heights are locked in at measure time, and inside the tab bar's `auto` row the tile was measured unbounded, so its cell hugged the 20dp icon and the layout-time stretch dumped the leftover space below/right of it. Giving the tile an explicit `height: 48` bounds its measure, so its `rows="*"` cell genuinely fills and the icon's center alignments work — confirmed by native bounds (icon at exactly (72−30)/2 within the tile on both axes).
> - **Height/shadow mismatch**: MaterialButtons render 48dp tall inside a 60dp layout box (6dp built-in top/bottom insets), while the tile was stretching to the full 60dp row. It now gets `margin: 6 2` plus the 48dp height, so its edges and its elevation shadow align with the neighboring buttons.
>
> The 48dp is derived from the tab buttons' current font/padding metrics, so if the tab-button styling ever changes materially, that value would need to follow — I left a comment in `app.css` tying them together.
</details>
<details>
<summary>Prompts Used</summary>
On the main page, there's a triple-dot menu. Its icon is currently black-on-dark (this is true on both a light-mode device and a dark-mode device; the top bark has a dark background in both cases). Make that icon white instead.
We have a connection-status indicator on the main page, that says "Disconnected" or "Connected" or "Reconnecting". Let's move this onto the top-bar, as white text, right-aligned next to the triple-dot menu.
We have several problem-status warnings, eg for not having battery-optimization permission, that appear on the main page in the form of a large button below the screen preview. Let's convert all of thes into a yellow triangle ! icon that appears on the top bar, in between the connection-status indicator and the triple-dot menu. Tapping it will open a modal that shows the message that was previously shown, with a button to do the suggested action.
> All three changes are in, and the project builds and typechecks cleanly. Here's what I did:
>
> **White overflow icon** — The root cause is that NativeScript builds its toolbar programmatically, so the `theme` overlay in `NativeScriptToolbarStyle` (an XML-inflation-time attribute) never applied, and the overflow icon fell back to the light activity theme's dark `textColorSecondary`. I added an `actionOverflowButtonStyle` with a white `android:tint` to `AppThemeBase` in `App_Resources/Android/src/main/res/values/styles.xml`, so the icon is white on every page's bar (they all share the dark #424242 background), in both light and dark device themes.
>
> **Connection status in the top bar** — The ActionBar now has a custom titleView (`main-page.xml:5`): "Faceclaw" on the left, and a right-aligned white status label next to the menu. Since the old status string could be a whole sentence ("Reconnecting after ...", "Failed: ..."), the bar shows a short label derived from the connection phase — Connected / Connecting / Reconnecting / Disconnected / Charging / Disconnecting / Failed — and tapping it opens an alert with the full status message, so failure details aren't lost. The old status label below the controls is removed.
>
> **Warnings → ⚠️ icon + modal** — The three inline warning blocks (Even-app conflict, firmware, battery optimization) are gone from the page body in both portrait and landscape. A yellow warning-triangle emoji now sits between the status label and the overflow menu whenever any warning is active. Tapping it opens an in-page modal (same overlay pattern as the existing text-setting editor) titled "Attention needed", listing each active warning with its original message and action button, plus a Close button. The modal closes when you take an action, and auto-closes if the last warning clears while it's open. One side effect: the landscape layout previously showed the firmware warning without its install button — in the modal it now has the button like everything else.
>
> Worth an on-device check: the overflow-icon tint (theme change, so a full reinstall rather than hot reload), and that the titleView labels sit vertically centered against the toolbar height.
<hr>
Thanks. That all looks good, except there are some stylign issues on the warning modal. On a wide tablet, the modal is full-width, which is too wide. When the device is dark-mode, the "Attention needed" title is white-on-light-gray. The title and the warning text need some left/right padding between them and the edges of the modal.
> All three styling issues are fixed and the build is clean:
>
> - **Too wide on tablets**: the modal's width now comes from a `warningsModalWidth` getter in the view model — screen width minus the margins on phones, capped at 480 DIPs on tablets — and it's centered horizontally. It re-computes on orientation change along with the other layout metrics.
> - **White title in dark mode**: the theme's `.ns-dark .h2` rule was beating my `.warnings-modal Label` rule on specificity. I added a `.ns-dark .warnings-modal Label` selector so all text in the modal stays dark-on-light in both modes (the modal deliberately keeps its light look, matching the text-setting modal).
> - **Missing edge padding**: NativeScript ScrollViews don't apply their own padding to their content, so the `padding: 16` on the modal was silently doing nothing. It now lives on an inner `warnings-modal-content` StackLayout; the border/background/margin stay on the ScrollView.
>
> One note: the text-setting editor modal (`system-name-modal`) uses the same `h2`-on-light-background pattern, so its title likely has the same white-on-light problem in dark mode — I left it alone since you only flagged the warnings modal, but it'd be the same one-line fix if you want it.
</details>
<details>
<summary>Prompts Used</summary>
Let's add two links to the footer of the "Before you continue" page: A link to the license (GPLv3, contained in LICENSE), and a link to the privacy policy (PRIVACY).
<hr>
Continue
> Done — the build passes. The "Before You Continue" page (step 2 of onboarding) now has a footer with two tappable links, "License (GPLv3)" and "Privacy Policy", centered between the disclaimer text and the Back/Agree buttons. They're only visible on that step, so the splash and firmware steps are unchanged.
>
> What I added:
>
> - **`app/phone-ui/document-page.xml` / `.ts`** — a new phone-side viewer page with an ActionBar (title + back button) and a scrollable label. It reads the doc from `about/<fileName>` in the app bundle; webpack already copies LICENSE and PRIVACY there (webpack.config.js:12), since the glasses-side Settings About section uses them too.
> - **`onboarding-page.xml`** — a third grid row with the two links, bound to `footerVisibility` so it collapses on steps 1 and 3.
> - **`onboarding-view-model.ts`** — `onLicenseTap`/`onPrivacyTap` handlers that navigate to the document page, and the `footerVisibility` getter wired into `publish()`.
> - **`app.css`** — link styling (blue, underlined, padded for a comfortable tap target, lighter blue in dark mode) and a modest 13pt size for the doc text since both files are hard-wrapped plain text.
>
> Untested on hardware: worth a quick visual check that the links look right in dark mode and that the LICENSE text (which is 80-column preformatted) reads acceptably in the proportional font.
</details>