Commit Graph
508 Commits
Author SHA1 Message Date
Chris LeeandClaude Opus 5 8cdee83ff4 Windows: decide a surface's visibility when the call is queued, not before
connect() registers window surfaces in a loop that reads the foreground
window once, before the loop, then awaits each surface's configure call
before queuing its visibility. On a fresh process restoreOpenApps runs at
the same time and focuses windows as it relaunches them. The bridge runs
Java calls in order, so a visibility decided before the await lands after
the focus change's own calls and undoes them: the old foreground can stay
visible and cover the new one, and a later window switch doesn't clear
it, because a switch only hides the window being left.

configureWindowSurface now also accepts visibility as a function, asked
after the configure call, when the visibility call is queued. The display-
attach loops (glasses and preview), the display-mode, per-app layout and
vertical-position changes, and an in-process window's height-mode change
pass one. Launch paths that pass a literal false are unchanged.

Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
2026-09-25 22:24:22 -07:00
Chris LeeandClaude Opus 5 54eae0c6b9 Stop leaking every submitted frame's pixel buffer in native memory
Passing a JS ArrayBuffer to a Java ByteBuffer parameter leaks it in
@nativescript/android 9.0.4 through 9.1.1: JsArgConverter wraps the backing store with
NewDirectByteBuffer and takes a JNI global ref that it never deletes. The
ref keeps the ByteBuffer reachable, so makeInstanceWeakAndCheckIfAlive
always answers "alive", the JS finalizer re-arms, and V8 never frees the
ArrayBuffer. submitSurfaceFrame passed a fresh copy of each frame this way,
so every frame leaked a full surface (576x260, 640x452 or 640x480 bytes)
plus one global ref, including frames that Java then discards as unchanged.
The draw-list buffer and buzzer payloads leaked the same way.

Each payload now goes through a reused Java direct ByteBuffer
(app/native/java-direct-buffer.ts): JS writes into it through an
ArrayBuffer.from view, and the Java object itself is passed, which takes
NativeScript's ordinary object path. Every consumer (SurfaceCompositor
applyAndComposite, playBuzzerSequence) copies before returning, so one
buffer per JS context is safe.

Covered: the communicator bridge (frames, draw lists, buzzer, which also
carries EvenHub tones), the preview-only display, and all eight worker
apps. Workers submit through the Android getActiveDisplay() (frames) and
worker-buzzer (tones), so the reused buffers live there rather than in
each worker; the worker sources are shared with iOS, whose active display
takes the ArrayBuffer itself. The
smaller one-off crossings (glyph and image atlas registration, the gray
preview helper, firmware and file writes) are left as they are.

tests/java-direct-buffer.test.cjs covers the helper against a fake
ByteBuffer, and the Android worker-buzzer test stubs it.

(Rebased onto main by James Babcock: worker changes moved into
active-display.ts and worker-buzzer.ts.)

Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
2026-09-25 22:24:22 -07:00
James Babcock 833f9d97f0 Merge pull request #33 from jmomakesstuff/add-secret-scanning
Add a secret-scanning workflow
2026-09-25 22:15:08 -07:00
James Babcock f8bed915aa Merge pull request #37 from jmomakesstuff/fix-silent-mode-dead-end
Say how to leave silent mode
2026-09-25 22:14:24 -07:00
James Babcock efafcb0f0c Fix unit tests 2026-09-25 22:13:02 -07:00
James Babcock 2f88b108a8 Merge branch 'main' of https://github.com/jimrandomh/faceclaw 2026-09-25 22:08:18 -07:00
James Babcock 419eef7cca Merge pull request #39 from jmomakesstuff/fix-test-build-events
Compile events.ts for the tests, and run the Kotlin tests in CI
2026-09-25 22:07:53 -07:00
James Babcock 459560cd72 Fix a frozen menu in the notification modal 2026-09-25 22:06:44 -07:00
James Babcock cc1ae93fde Merge branch 'main' of https://github.com/jimrandomh/faceclaw 2026-09-25 14:55:58 -07:00
James Babcock 6ec050cc39 Compass calibration readiness visible by default 2026-09-25 14:40:11 -07:00
James Babcock 668e454fbb Terminal app: Tap host to launch a shell (alternative to app context menu) 2026-09-25 14:11:20 -07:00
James Babcock b0a98f5942 Add animations to launcher and Files app 2026-09-25 13:25:51 -07:00
James Babcock 7ad9fe10ad Calendar: Fix a timezone issue that could cause all-day events to appear on the preceding day 2026-09-25 11:56:29 -07:00
JMO 9de46878b0 Run the Kotlin tests in CI
npm run test:kotlin covers the shared Kotlin (protocol, flash prompt, OTA, compositor) and was not run by any workflow.
2026-09-25 08:22:25 -07:00
JMO 0459f34e5b Drop the silent-mode clearing, keep only the exit instruction
The native session already clears silent mode on touchpad input and re-reads it on every battery poll, so the TypeScript-side clearing duplicated that. The display-target trigger was also wrong: the communicator stays up in silent mode, so it cleared the flag on the next shell render.
2026-09-25 08:11:31 -07:00
JMO a61897813d Merge remote-tracking branch 'upstream/main' into pr37-merge
# Conflicts:
#	app/g2/dashboard-controller.ts
2026-09-25 08:10:57 -07:00
JMO cd32aed849 Compile events.ts for the tests
tests/ios-glanceboard.test.cjs requires .test-build/app/g2/events.js, but events.ts was not in tests/tsconfig.json, so a clean build never produced it.
2026-09-25 08:09:56 -07:00
James Babcock a6291cf937 Fix missing rerender when EvenHub apps finish downloading 2026-09-25 02:02:16 -07:00
James Babcock d6ce2f4194 Fix an issue where brightness updates caused a 1 second flicker 2026-09-25 02:01:50 -07:00
James Babcock 09a59b9821 Fix the EvenHub login form sizing and missing cancel button 2026-09-25 01:56:52 -07:00
James Babcock 90d60cee10 Dither when darkening for the system context menu 2026-09-25 01:30:26 -07:00
James Babcock 4f3ad37c20 Custom auto-brightness, and fade in/out effects 2026-09-25 00:57:43 -07:00
James Babcock f66e0b025f Add partial rows and a bounce effect to menus 2026-09-24 12:23:20 -07:00
James Babcock c801bd5185 Animate scrolling in menus 2026-09-24 11:04:10 -07:00
James Babcock 915f155819 Add Glanceboard depth setting 2026-09-24 02:26:20 -07:00
James Babcock 71c1971992 Use animated menus in a bunch more places 2026-09-23 23:57:50 -07:00
James Babcock 123c1142d6 Better menu class; use it in the Music app 2026-09-23 22:05:44 -07:00
James Babcock 440674b261 Animations are mainly on the typescript side, not kotlin 2026-09-23 22:05:06 -07:00
James Babcock 063d8a0b03 Clean up magic-numbers used in menu animation 2026-09-23 11:34:20 -07:00
James Babcock 08f1b9a2a2 Optimize on-glasses animation 2026-09-23 02:58:29 -07:00
James Babcock c8d835176f Display-list based menu slide animation 2026-09-23 01:13:03 -07:00
JMO b361cdd934 Say how to leave silent mode, and drop the belief when it is contradicted
Silent mode is entered and exited only by long-pressing both touchpads. While
it is on the firmware ignores all input and blanks the display, so from the
phone the glasses look connected and simply answer nothing. The app cannot turn
it off either: the communicator exposes onSilentMode and a listener set, and no
setter.

The status read "Connected (Silent mode enabled)", which names the state but
not the way out of it, and someone who triggered the gesture by accident has no
reason to know the gesture exists. It now names it.

The belief can also go stale. silentMode is set by the firmware's push event
and cleared only when the phase goes to disconnected, on the assumption that it
is re-reported on the way back up. Toggle silent mode on the glasses without
the link ever dropping and that assumption does not hold: a missed "off" leaves
the phone claiming silent mode for as long as the connection lasts. Observed
with the status reading silent while the glasses were granting framebuffer
leases and rendering frames, which cannot happen in a mode whose whole
behaviour is to blank the display and ignore input.

So the belief is dropped whenever the glasses do something that mode makes
impossible: input from them, since the firmware discards input while silent, or
a shell render that gets past the display-target check, since silent mode does
not leave a display target standing. The second matters because it self-heals
without the user touching anything.

Not unit-tested. Both halves are in dashboard-controller.ts, which imports 56
modules, so a test there would mostly exercise mocks, and the stale-clear is
state management across events rather than a pure function. The refactor that
would make it testable is moving the silent-mode belief into a small state
holder taking the firmware's push events plus the two kinds of contradicting
evidence; glasses-display-state.ts next door is already exactly that shape.
2026-09-22 22:09:40 -07:00
James Babcock 92e8def0f0 Merge branch 'main' of https://github.com/jimrandomh/faceclaw 2026-09-22 21:40:55 -07:00
James Babcock be20b24985 Merge pull request #34 from jmomakesstuff/fix/evenhub-signin-form
Fix the EvenHub sign-in form reopening every launch and never closing
2026-09-22 21:40:49 -07:00
James Babcock 4a194e37bb Refactor iOS version to use a bunch more shared code 2026-09-22 21:26:51 -07:00
James Babcock c3a0ba9f56 Refactor Kotlin for iOS commonality 2026-09-22 19:55:08 -07:00
JMO 662cbd75dc Fix the EvenHub sign-in form reopening every launch and never closing
Open EvenHub once without finishing sign in and the phone side form comes back
on every app start, with no way to close it. Back exits the app rather than
closing the form.

Three things combine:

- EvenHubStoreLayer.paint() opened the credential editor on its first paint
  when no credentials were stored. First paint includes the restore of a
  still-open EvenHub at startup, so an unfinished sign in put the form back
  every time. handleInput already opens it on a click, so the auto open only
  removed the choice of when.

- LayerActions.startTextSettingsEdit declares a fifth onCancel parameter, but
  the DashboardController wiring forwarded four and the method accepted four.
  Nothing failed to compile, because a 4-parameter function is assignable to a
  5-parameter function type. That callback resets openCredentialEditor's
  phoneEditor guard, so with it dropped the guard latched at "credentials":
  the screen timeout hid the panel without resetting the state behind it, and
  the form could then be neither closed nor reopened. ios-preview-controller.ts
  already forwards all five, so this was the G2 path only.

- The panel has no Cancel control, so the keyboard's Done key on the password
  field is the only way to end the edit. On an untouched form that reached
  submitCredentials, which called enterLogin("Email and password are
  required."), which reopens the editor. A loop with no exit.

The auto open is removed; onCancel is forwarded, stored and fired from
endTextSettingEdit, with finishTextSettingEdit clearing it first so a completed
edit does not also report a cancel; and a wholly empty submission is treated as
a cancel. A half-filled form is a real mistake and still reopens with the
message.

tests/evenhub-signin.test.cjs covers the open and close contract through the
existing load-typescript.cjs loader. Two of its five tests fail against the
current store-layer.ts and pass with this change.
2026-09-22 19:07:22 -07:00
James Babcock 587364e5e6 Convert most Android-specific kotlin to shared or shareable 2026-09-22 18:43:55 -07:00
James Babcock f9724ddcab Convert remaining Java to Kotlin 2026-09-22 17:26:09 -07:00
JMO c2dbd33e6d Add a secret-scanning workflow
Runs gitleaks on pushes to main and on pull requests. The settings file
pull_config.sh produces holds API keys in plain text, and .gitignore covers the
default filename, but nothing catches a rename or a key in a test fixture.

.gitleaks.toml allowlists one path: the constant in app/apps/evenhub/even-api.ts
that matches the generic-api-key rule. Scoped by path rather than disabling the
rule, so everything else is still scanned.
2026-09-22 16:28:16 -07:00
James Babcock ea9bfae6af Refactor: g2flash protocol doesn't have so many magic numbers 2026-09-22 16:27:04 -07:00
James Babcock 306accf06d Move Nightscout "Always show in top bar" setting earlier in the form so it's harder to miss 2026-09-22 15:15:31 -07:00
James Babcock 2e4d20e130 Clean up unused worker threads for closed apps; other performance optimizations 2026-09-22 14:56:54 -07:00
James Babcock 9560f3ac8d Phone CPU usage optimization 2026-09-22 14:19:23 -07:00
James Babcock 44eddedc01 Add script for collecting CPU profile information 2026-09-22 11:54:45 -07:00
James Babcock 392554dd37 Depth effects 2026-09-22 10:59:51 -07:00
James Babcock 4320021222 Display lists 2026-09-22 00:25:40 -07:00
James Babcock a7af84e231 Nightscout glanceboard widget shows out-of-bounds values when out of space 2026-09-21 18:08:29 -07:00
James Babcock 26b7da9797 Merge branch 'main' into cache-management 2026-09-20 18:36:36 -07:00
James Babcock 313ccd86d9 Ungate some settings on iOS 2026-09-20 18:33:24 -07:00