Files
faceclaw/app/native/device-discovery.ts
T
James BabcockandClaude Fable 5 17182532f4 Address review findings for the proximity-pairing PR
Correctness:
- Pair-glasses flows no longer strand the app in the manual-disconnected
  state: the pre-scan disconnect is followed by resumeAutoReconnect(), and
  the config page's scan hand-off drops the live link too.
- The mixed-arms serial warning is reachable now: pairs() groups by the
  canonical serial key, and a lone left + lone right with different serials
  get the mismatch warning on both rows (it previously required two
  different serials inside one serial-keyed group, which cannot happen).
- A selected pair that degrades to one arm (prune while the page is open)
  is deselected, and Save never pads a missing arm from stored addresses.
- DiscoveryAggregator.ingest no longer lets a bonded re-emit or split
  advertisement overwrite the note/name/flag learned from a full
  advertisement, and reclassifies split reports using remembered fields so
  a nameless half doesn't drop the arm.
- estimateProximity ignores the advertised TX Power Level (radiated power,
  not measured-power-at-1m); the calibration table is the only reference.
- Saving a ring without a glasses pair updates the stored identity's ring
  name/address instead of leaving the previous ring on record.
- Ring detection requires the stock "EVEN R1" name prefix in both the TS
  classifier and the Java pre-filter; a bare "R1" substring matched
  unrelated devices, and ring rows are always selectable.
- One-shot scans keep every sample (buildAddressSet merges them through
  DiscoveryAggregator), and flash-flow address resolution takes left/right
  from one serial-joined complete pair instead of latest-per-role.

Lifecycle:
- The pairing scan and its refresh timer pause on app suspend and resume
  with the app, and the model's app-event hooks are detached when the page
  is left for good.

Cleanup:
- One MAC normalizer (even-advertisement.normalizeMacAddress, re-exported
  by device-addresses), used for the ring "Yours" comparison too.
- One serial-equality definition (serialKey/serialsMatch); the containment
  fallback in isPreviouslyPaired is gone.
- Shared formatErrorMessage replaces five per-view-model copies; shared
  hex-util replaces the duplicate TS hex codecs; one Java bytesToHex in
  FaceclawFirmwareUtil replaces three hand-rolled encoders.
- glassesRow/ringRow share a presentation-base helper; dead row address
  fields, the constant glassesSectionVisibility, the identical-branch
  status ternary, and zoneRank/ZONE_ORDER are removed.
- .gitignore now actually covers .test-build/ as tests/README claims.

UI:
- Dark-mode styles for the pairing page: readable instructions, dark-gray
  cards with consistent light text; light mode keeps its current look.

Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_016ZqzwmRQ3HQxasBz5rYyZV
2026-08-23 15:28:59 -07:00

195 lines
6.8 KiB
TypeScript

import { Utils } from "@nativescript/core";
import { type RawAdvertisement } from "../g2/even-advertisement";
import { DiscoveryAggregator } from "../g2/pairing-candidates";
declare const com: any;
export type DiscoveryEvents = {
onAdvertisement: (raw: RawAdvertisement) => void;
onScanFailed?: (code: number, message: string) => void;
onLog?: (line: string) => void;
};
export type DiscoveredAddressSet = {
left: string;
right: string;
ring: string;
summary: string;
};
/**
* TS wrapper around the native FaceclawDeviceDiscovery. The live scan streams
* raw advertisements (see `RawAdvertisement`); protocol decoding happens in
* `app/g2/even-advertisement.ts` and pair grouping in
* `app/g2/pairing-candidates.ts`.
*/
export class DeviceDiscoveryBridge {
private readonly discovery: any;
private listenerProxy: any = null;
private events: DiscoveryEvents | null = null;
constructor() {
const context = Utils.android.getApplicationContext();
if (!context) throw new Error("Android application context unavailable");
this.discovery = new com.faceclaw.app.FaceclawDeviceDiscovery(context);
}
get bluetoothEnabled(): boolean {
return !!this.discovery.isBluetoothEnabled();
}
get scanning(): boolean {
return !!this.discovery.isScanning();
}
/** Start (or re-target) the live scan. Returns false when the radio is off. */
startScan(events: DiscoveryEvents): boolean {
this.events = events;
if (!this.listenerProxy) {
this.listenerProxy = new com.faceclaw.app.FaceclawDeviceDiscoveryListener({
onAdvertisement: (json: string) => {
const raw = parseRaw(String(json));
if (raw) this.events?.onAdvertisement(raw);
},
onScanFailed: (code: number, message: string) => this.events?.onScanFailed?.(Number(code), String(message)),
onLog: (line: string) => this.events?.onLog?.(String(line)),
});
this.discovery.setListener(this.listenerProxy);
}
return !!this.discovery.startScan();
}
stopScan(): void {
try {
this.discovery.stopScan();
} catch {
// ignore
}
}
/** Push bonded Even devices through the listener as `source: "paired"` entries. */
emitBondedDevices(): void {
if (!this.listenerProxy) return;
this.discovery.emitBondedDevices();
}
async getBondedCandidates(): Promise<RawAdvertisement[]> {
return parseRawArray(String(this.discovery.getBondedCandidatesJson()));
}
/**
* Collect advertisements for `timeoutMs` without blocking the UI thread
* (scan callbacks are delivered on the main looper, so a blocking sleep
* there would starve them). Every sample is kept: Android can split one
* advertisement across reports (name in one, manufacturer data in another),
* so "latest per address" would drop the informative half — the aggregator
* in `buildAddressSet` merges them instead.
*/
scanCandidates(timeoutMs = 6000): Promise<RawAdvertisement[]> {
return new Promise((resolve, reject) => {
const samples: RawAdvertisement[] = [];
const started = this.startScan({
onAdvertisement: (raw) => samples.push(raw),
onScanFailed: (code, message) => {
this.stopScan();
reject(new Error(`Bluetooth scan failed: ${message} (${code})`));
},
});
if (!started) {
reject(new Error("Bluetooth is off or BLE scanning is unavailable."));
return;
}
setTimeout(() => {
this.stopScan();
resolve(samples);
}, Math.max(500, timeoutMs));
});
}
}
/**
* Pick one address per role from a batch of raw advertisements — the manual
* address page's "load" helper and the flash flow's address resolution.
*
* Runs the batch through the same `DiscoveryAggregator` the pairing page
* uses, so left/right come from ONE serial-joined pair (the closest complete
* one) rather than from whichever arm of whatever pair advertised last —
* "latest per role" silently welded together arms of two different pairs.
* When no arm carries a serial at all (a bonded-device listing has no
* manufacturer data), there is nothing to join on and the latest arm per side
* is used as before.
*/
export function buildAddressSet(candidates: RawAdvertisement[]): DiscoveredAddressSet {
const aggregator = new DiscoveryAggregator();
for (const raw of candidates) aggregator.ingest(raw);
const classified = aggregator.advertisements();
const pairs = aggregator.pairs();
let left = "";
let right = "";
const completePair = pairs.find((pair) => pair.completeness === "complete");
if (completePair) {
left = completePair.left!.address;
right = completePair.right!.address;
} else if (classified.every((candidate) => !candidate.serial)) {
for (const role of ["left", "right"] as const) {
const latest = classified
.filter((candidate) => candidate.role === role)
.sort((a, b) => b.seenAtMs - a.seenAtMs)[0];
if (role === "left") left = latest?.address ?? "";
else right = latest?.address ?? "";
}
}
// Arms with serials but no complete pair: leave the addresses empty. The
// summary below names what was heard; guessing would defeat the serial join.
const lines = classified.map((candidate) => {
const extras = [candidate.serial ? `serial ${candidate.serial}` : null, candidate.rssi != null ? `${candidate.rssi} dBm` : null].filter(Boolean);
return `${candidate.role}: ${candidate.name} ${candidate.address}${extras.length ? ` (${extras.join(", ")})` : ""}`;
});
return {
left,
right,
ring: aggregator.rings()[0]?.advertisement.address ?? "",
summary: lines.length ? lines.join("\n") : "No matching devices found.",
};
}
function parseRawArray(json: string): RawAdvertisement[] {
const items = JSON.parse(json) as unknown[];
return items.map((item) => parseRawObject(item)).filter((item): item is RawAdvertisement => !!item);
}
function parseRaw(json: string): RawAdvertisement | null {
try {
return parseRawObject(JSON.parse(json));
} catch {
return null;
}
}
function parseRawObject(item: unknown): RawAdvertisement | null {
if (!item || typeof item !== "object") return null;
const record = item as Record<string, unknown>;
const address = String(record.address ?? "");
if (!address) return null;
return {
address,
name: String(record.name ?? ""),
manufacturerData: String(record.manufacturerData ?? ""),
rssi: numberOrNull(record.rssi),
txPower: numberOrNull(record.txPower),
connectable: typeof record.connectable === "boolean" ? record.connectable : null,
bonded: record.bonded === true,
source: record.source === "paired" ? "paired" : "scan",
seenAtMs: numberOrNull(record.seenAtMs) ?? Date.now(),
};
}
function numberOrNull(value: unknown): number | null {
if (value === null || value === undefined) return null;
const n = Number(value);
return Number.isFinite(n) ? n : null;
}