Commit Graph
3 Commits
Author SHA1 Message Date
James Babcock e09f8eae96 Simplify glanceboard-trigger angle setting; fix incorrectly-rotated accelerometer readings on G1
The glanceboard head-tilt option was more complicated than necessary,
because it wanted the user to take two angle measurements, a baseline
angle and a tilt angle. That was a workaround to not knowing the
accelerometer's orientation/calibration, but actually, we do know those.

(Except, as it turns out, on the G1, the accelerometer orientation is
different than it is on the G2, and there was a bug where EvenHub apps
got their accelerometer readings in the wrong orientation. So for
example the EvenHub Level app didn't work correctly.)
2026-11-15 23:29:02 -08:00
BrendenandClaude Opus 5.5 b1ca8b8ca1 Glanceboard: address review of head-tilt angle and glance down
- A verification read that still disagrees no longer requeues the writes at
  once (which looped while the firmware refused the value); the next regular
  poll retries.
- "Glasses default" now writes back the glasses' own switch and angle, saved
  before Faceclaw first changed them (persisted across app restarts), and
  drops writes still queued. Disabling the Glanceboard does the same.
- "Set to current head angle" takes two readings, head level then tilted up,
  and uses the angle between them, so it no longer depends on the sensor's
  axes or folds past 45°. A head that did not move is reported, not stored
  as 5°. The math is in head-tilt-math.ts, with tests.
- A head-tilt that woke a suspended session, or a trigger under 25° (where a
  level gaze stays above the head-down threshold), hides after the tap
  duration instead of the 60 s cap. The setting's description explains it.
- The angle rows are hidden on iOS, which cannot change the setting.
- The capture row repaints while measuring, ignores repeat selects, and its
  status clears when the menu reopens or the angle changes; the angle is
  sent once, by the controller's settings listener.
- Comments describing a head-tilt as a timed press are updated.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-06 12:20:19 -08:00
BrendenandClaude Opus 5.5 cf74f34767 Glanceboard: configurable head-tilt angle, glance down to hide
- Head tilt angle setting (Glanceboard): sets the glasses' own head-up
  trigger through the stock settings message (g2_setting.proto
  DeviceReceiveInfoFromAPP.deviceReceiveHeadUpSetting), so detection stays
  on the glasses and nothing streams while the screen is off. The stored
  calibration is read back and compensated for, and the value is
  re-applied on every connect. "glasses" (the default) leaves the
  glasses' setting untouched.
- "Set to current head angle" measures the tilt from a ~1.2 s IMU burst
  and rounds it to the nearest 5 degrees.
- Glance down to hide: a head-tilt showing now stays up until the head comes back down
  (HEAD_DOWN, forwarded by Faceclaw/38) instead of a fixed timeout, with
  a 60 s safety cap. HEAD_DOWN goes only to the Glanceboard on Android
  and iOS, so it never counts as shell activity.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-06 08:58:33 -08:00