Glasses running an older Faceclaw firmware revision cannot be upgraded at all.
The flash asks for confirmation on the lens first, and that firmware never
shows the prompt, so the one path off it is closed. Measured on revision 13
(base 2.2.9.22).
showPrompt writes the EvenHub create-prompt page to the right arm and waits for
an ack. The lens accepts the write at the GATT layer and then answers nothing
and displays nothing: four attempts, four onWriteCharacteristic status=0
length=165, no reply. buildCreatePromptPage documents its geometry as
stock-firmware-safe "so this works before flashing", and that does not hold
there.
Three faults, each only visible once the previous one is fixed.
An unacked prompt page was fatal. Flashing is the only way off that firmware,
so failing here leaves the glasses permanently unupgradable. An unacked page
now falls back to the phone-side confirmation that the low-battery retry
already uses, on a screen that says what is being given up: the on-lens step is
what proves the glasses are the wearer's.
connectArm made a single attempt. The lens is routinely unavailable for a
moment just after a previous link to it closed, which is exactly the state a
retry is in, so the fallback failed instantly with "could not connect to the
right arm". FaceclawFirmwareFlasher.connectLensResilient already retries within
a window for this reason; connectArmResilient mirrors it and reports each
attempt.
That retry then tripped the lost-connection latch. Disconnecting between
attempts fires onConnectionStateChange, which set rightLost AND finished and
counted down the selection latch, so a successful second attempt still aborted
with "Lost connection to the glasses". The callback now ignores drops while the
arms are still being established.
Logging, because a failed flash used to leave almost nothing to read. emitLog
reached logcat, but emitState, emitProgress and emitComplete on the flasher,
and emitState and emitResult on the prompt communicator, went only to the
in-app listener, so the line carrying the reason existed only on the phone
screen. Seven `catch (Exception ignored)` blocks across the two classes now log
with the Throwable, matching the call sites elsewhere that already do.
tests/flash-prompt-fallback.test.cjs covers the decision at its seam through
the existing load-typescript loader. The first test fails against the current
view model and passes with this change; the second is a regression guard and
passes either way, so an unrelated failure cannot quietly skip the on-lens
confirmation.
Verified on hardware: both lenses flashed through this path after it had been a
dead end.
Open EvenHub once without finishing sign in and the phone side form comes back
on every app start, with no way to close it. Back exits the app rather than
closing the form.
Three things combine:
- EvenHubStoreLayer.paint() opened the credential editor on its first paint
when no credentials were stored. First paint includes the restore of a
still-open EvenHub at startup, so an unfinished sign in put the form back
every time. handleInput already opens it on a click, so the auto open only
removed the choice of when.
- LayerActions.startTextSettingsEdit declares a fifth onCancel parameter, but
the DashboardController wiring forwarded four and the method accepted four.
Nothing failed to compile, because a 4-parameter function is assignable to a
5-parameter function type. That callback resets openCredentialEditor's
phoneEditor guard, so with it dropped the guard latched at "credentials":
the screen timeout hid the panel without resetting the state behind it, and
the form could then be neither closed nor reopened. ios-preview-controller.ts
already forwards all five, so this was the G2 path only.
- The panel has no Cancel control, so the keyboard's Done key on the password
field is the only way to end the edit. On an untouched form that reached
submitCredentials, which called enterLogin("Email and password are
required."), which reopens the editor. A loop with no exit.
The auto open is removed; onCancel is forwarded, stored and fired from
endTextSettingEdit, with finishTextSettingEdit clearing it first so a completed
edit does not also report a cancel; and a wholly empty submission is treated as
a cancel. A half-filled form is a real mistake and still reopens with the
message.
tests/evenhub-signin.test.cjs covers the open and close contract through the
existing load-typescript.cjs loader. Two of its five tests fail against the
current store-layer.ts and pass with this change.
<details>
<summary>Prompts Used</summary>
User: This checkout corresponds to https://github.com/jimrandomh/faceclaw/pull/27. Review this branch.
GPT-6 Astra:
> Found one issue:
>
> - **[P2] Wait for Whisper’s final result before completing dictation** — [FaceclawVoiceController.java:729](/Users/jbabcock/repositories/g2/faceclaw/App_Resources/Android/src/main/java/com/faceclaw/app/FaceclawVoiceController.java:729). Skipping partial decodes leaves short utterances without text until release, but the dialog still finalizes after its existing timeout. If decoding exceeds roughly 2.7 seconds (native stop’s 1.5-second wait plus the dialog’s 1.2-second timeout), auto-send can abandon a short command or send an incomplete longer one. Continue can append the late editing instruction literally instead of refining the message. I reproduced these outcomes with delayed transcript events. These flows should await recognition completion.
>
> Validation: TypeScript and a clean Android build passed. All 21 test failures also occur on `main`. Actual Whisper latency was not tested on hardware.
<hr>
User: Thanks, let's fix that issue.
GPT-6 Astra:
> Fixed. Dictation now waits for native recognition to finish before fallback timers run. Auto-send, Continue, and AI Chat preserve delayed Whisper results; cancellation ignores late transcripts.
>
> TypeScript and Android builds pass. All 11 new regression tests pass. The full suite still has the same 21 pre-existing failures.
</details>
sherpa-onnx's native library already reads an offline Whisper config
(verified against sherpa-onnx/jni/offline-recognizer.cc at v1.13.0);
only the Java wrapper was a package-private stub. This adds a public
OfflineWhisperModelConfig builder and wires base.en (int8) in as a
second on-device model next to Moonshine.
- FaceclawVoiceController: setOnboardModelKind() selects the model
before start("onboard"); defaults to Moonshine. Whisper skips the
700ms live-partial redecode (each call re-encodes the whole utterance
plus ~10s of tail padding) and gates near-silent segments before
decode.
- asr-model.ts: ASR_MODELS registry with per-model download state.
- Settings > Voice: "On-device (Moonshine)", "On-device (Whisper)",
and "OpenAI (Whisper)" for the existing cloud provider (stored
value unchanged); one model row per on-device model.
- Microphones live captions pass "moonshine" explicitly (unchanged).
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>