Review fixes for the charging-case battery:
- The case reports whether the glasses are docked. An empty caseInfo
(the reply out of the case) now parses as "not docked, no level"
instead of nothing, and undocking is reported even when the level and
charge state are unchanged. TS keeps the last level but clears
caseCharging while the glasses are out of the case.
- The phone line shows the charging mark only while it is live: G2 and
Case only with a link to the glasses (connected or charging), and Case
only while docked. Levels stay as the last known ones.
- The session-start case read waits until the layout is up, so a
firmware that ignored it could no longer hold up the first frame. When
the glasses are already charging at connect, the charging-mode read is
the only one; the old duplicate read and its "late ACK" log are gone.
- Case dedup state resets on every connect, as wearState does, so each
session's read reaches TS.
- caseCharging uses > 0 like the headset, and is normalized to 0/1.
- iOS now feeds the reading into the shell battery state, and the
assistant's describeState includes the case level.
- The batteryLine accessors move above connectionStatusLabel's doc
comment.
The glasses relay the charging case's state on UX_GLASSES_CASE_APP_ID
(sid 0x81): GlassesCaseDataPackage{commandId=CASE_INFO, magicRandom,
caseInfo{soc, chargeStatus, lidStatus, inCaseStatus, errorCode}}, the
schema in g2-kit-unofficial's glasses_case.proto. The Even app reads it
with an empty caseInfo (ProtoBaseSettings.getGlassesCaseInfo).
Observed on G2 2.3.0.24 / Faceclaw/38: while docked the right temple
pushes a GlassesCaseInfo (flag 0x01, its own magic) on every change --
docking, lid, USB, each 1% -- and answers a read with full data; out of
the case a read comes back with an empty caseInfo. Docking pushes
{inCaseStatus=1} before the level, and proto3 drops zero fields, so a
missing soc means no level rather than 0%.
So read it once at session start (docked glasses may be fully charged
and never enter charging mode) and again on entering charging mode,
which clears the queue; pushes carry every later change. Every 0x81
frame is taken as state in onNotification (pushes skip the ack path by
flag). New readings reach TypeScript through
FaceclawBleCommunicatorListener.onCaseState (level, case-charging), on
Android and iOS. Captured frames are tests.
The same NativeScript conversion leak as the frame path (see
java-direct-buffer.ts) applied to every other ArrayBuffer handed to a
Java ByteBuffer parameter:
- Shell scenes (submitShellScene on the bridge and the preview display),
submitted on every shell render, which the frame-path fix predates.
These now go through a reused JavaDirectBuffer like frames do.
- Glyph, firmware-glyph and image atlas registration, Mapbox image
decode, the preview placeholder bitmap, firmware hash/write, binary
file writes and the EvenHub privacy-policy download, plus the Kotlin
protocol smoke test. These are rare or large, so they cross through a
new copyToJavaByteBuffer: a fresh Java direct buffer per call that is
freed normally, rather than one pinned for the life of the isolate.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
Passing a JS ArrayBuffer to a Java ByteBuffer parameter leaks it in
@nativescript/android 9.0.4 through 9.1.1: JsArgConverter wraps the backing store with
NewDirectByteBuffer and takes a JNI global ref that it never deletes. The
ref keeps the ByteBuffer reachable, so makeInstanceWeakAndCheckIfAlive
always answers "alive", the JS finalizer re-arms, and V8 never frees the
ArrayBuffer. submitSurfaceFrame passed a fresh copy of each frame this way,
so every frame leaked a full surface (576x260, 640x452 or 640x480 bytes)
plus one global ref, including frames that Java then discards as unchanged.
The draw-list buffer and buzzer payloads leaked the same way.
Each payload now goes through a reused Java direct ByteBuffer
(app/native/java-direct-buffer.ts): JS writes into it through an
ArrayBuffer.from view, and the Java object itself is passed, which takes
NativeScript's ordinary object path. Every consumer (SurfaceCompositor
applyAndComposite, playBuzzerSequence) copies before returning, so one
buffer per JS context is safe.
Covered: the communicator bridge (frames, draw lists, buzzer, which also
carries EvenHub tones), the preview-only display, and all eight worker
apps. Workers submit through the Android getActiveDisplay() (frames) and
worker-buzzer (tones), so the reused buffers live there rather than in
each worker; the worker sources are shared with iOS, whose active display
takes the ArrayBuffer itself. The
smaller one-off crossings (glyph and image atlas registration, the gray
preview helper, firmware and file writes) are left as they are.
tests/java-direct-buffer.test.cjs covers the helper against a fake
ByteBuffer, and the Android worker-buzzer test stubs it.
(Rebased onto main by James Babcock: worker changes moved into
active-display.ts and worker-buzzer.ts.)
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
<details>
<summary>Prompts Used</summary>
Thanks. Next up, let's add a "Phone display" section to the Settings app (above the Watch section). We'll add a "Preview color" setting (options: White, Green; default White), which controls whether the mirror display is white/grayscale (best looking) or green (matches the physical glasses). We'll move the "Touch mirror" toggle setting (currently on the phone main screen) into the phone display settings menu. We'll add a "Show brightness control" toggle setting (default off) and a "Show screen size" toggle setting (default off), which control the visibility of the corresponding elements on the phone main screen.
Let's also make it so that double-tapping the watch (or simulated watch on the phone, mirror, etc) while the app-switcher is selected turns off the glasses display, in the same way that double-tappign the R1 ring does.
> All four pieces are in and everything builds (webpack, Gradle with the Java changes, and a clean `tsc`). Summary:
>
> **"Phone display" Settings section** — added between Roam and Watch in the on-glasses Settings app, with four entries:
> - **Preview color** (White/Green, default White) — new enum setting `phone.previewColor`. The colorization happens in the Java preview path: `PreviewBitmapUtil.fromGray` gained a `green` variant whose LUT maps luminance to green-on-black instead of grayscale, threaded through `getCompositePreviewBitmap` → `getCompositePreview(green)` → the controller, which reads the setting per refresh. A settings change also schedules an immediate preview refresh, so flipping the color updates the mirror right away instead of waiting for the next composited frame.
> - **Touch mirror** — moved from the phone main screen. It's now a proper `ConfigSettingBoolean` reusing the existing `phone.mirrorTouch` storage key, so anyone who already turned it off keeps that choice. The label+switch pair is gone from the ring row in `remote-controls.xml`, and the view model reads the setting per gesture.
> - **Show brightness control** and **Show screen size** (both default off) — new booleans controlling visibility of the brightness slider/Auto toggle and the display-mode picker on the phone main screen. The whole display-controls row collapses when both are off; the bindings refresh through the existing `onAnySettingChanged` → `refreshDisplayControls` path, so toggling them from the glasses updates the phone screen live. Note this means the main screen is more minimal out of the box — brightness and screen size remain reachable via the Settings app either way.
>
> **Watch double-tap at the app switcher** — the watch-scheme special case in `handleSidebarInput` is removed: a double-click from any source (watch, phone pad/d-pad, mirror double-tap — they all arrive as source `"watch"`) now turns the display off when the sidebar is selected, exactly like the ring's. The original code deliberately excluded the watch on the theory that sleeping was a trap since any watch gesture re-wakes; with your "Watch input wakes display" setting now gated (and double-tap waking a dark display regardless), the toggle behavior is symmetric: double-tap at the switcher sleeps, double-tap again wakes.
>
> Hardware-test notes: the green preview tint and the collapsed-controls layout are worth one visual check on the phone, and the double-tap-to-sleep from the watch is a quick on-device confirm.
</details>
Add a Wearable Data Layer bridge for syncing dashboard state and commands.
Introduce a standalone watch app with assistant, app launcher, touchpad remote, settings, and connectivity UI.
* Display a warning if paired glasses do not have a compatible custo firmware
* Fix certain notification icons being missing on system card
* Rescale large notification icons with proper sampling; don't send unnecessary